Autor Tema: GibbsCAM 2018 V12 version (4/11)  (Leído 121 veces)


  • Usuario Héroe

  • Desconectado
  • *****
  • 1.545
  • X-Tremitos:
  • Texto personal
    • Ver Perfil
GibbsCAM 2018 V12 version (4/11)
« en: 04 de Noviembre de 2018, 04:01:11 am »
GibbsCAM 2018 V12 version

GibbsCAM 2018 V12 version | 29.0 Gb
Languages: English, Chinese Simplified, Chinese Traditional, Czech, Dutch, Finnish, French, German,
Italian, Japanese, Korean, Polish, Portuguese, Russian, Spanish, Swedish, Turkish

3D Systems is pleased to announce the immediate availability of GibbsCAM 2018 V12 (version GibbsCAM is simply exceptional. This outstanding multi-functional performer and total solution platform, is built to supply value and capabilities for any professional programmer.

- Added support for translating SolidWorks 2019 files. *DOES NOT APPLY TO SOLIDWORKS SPATIAL READER OPTION.* (49795)
Bug Fixes
- Changing active CS no longer changes the location of the toolpath. (49794)
- Fix to thread mill CP2 field on main still being enabled when the CP2 value on the hole feature tab is set to hole feature. (49739)
- Basic Utility Ops no longer classify a part as not "simple 3-axis".(49767)
- Fixed an issue related to machine marker behavior. (49792)

- Do It button is now be enabled/disabled as requested. (49252)
- Deleting tools is much faster now. (49702)
- Added Granite 11.0.2 to GibbsCAM 12. (49666)
- Added UNITS parameter to GET_TOOL_DATA and SET_TOOL_DATA Value 0=metric, 1=inch. See Macro Wiki. (49699)
- User-defined approaches and retracts can now be defined as either rapid or fast-feed. (49662)
Bug Fixes
- Fix to setting engrave data via a macro not applying the proper font. (49516)
- Spindle Selection is now working properly. Got rid of flawed check for setting spindle. (49681)
- New process parameters added for surface stock, see macro wiki. (49569)
- Toolpath will be trimmed to the given stock after redo. (49682)
- Fix to crash in rendering when a bad user defined workgroup stock has been defined. (49686)
- Redoing Transformed Operations time has been significantly reduced to be equivalent or better than 11.3. (48867)
- Rendered image is no longer faceted when comparing with previous versions. (49641)
- Fixed the problem of duplicate diameter warning in toolholder. (49676)
- Machine Sim no longer crashes when Watches previously shown. (49697)
- Fixed the crash problem which is caused by thread issue. (49687)
- Attempting to delete a solid Body from the Body Bag with the WG dialog present, it no longer incorrectly attempts to delete a WG from the List. (49690)
- Search field in Custom Process Groups dialog now does function. (49706)
- Fixed Lathe Contour Process>Rotate Tab> "Reset to Tool Definition" & "Suggest Sub Position" buttons do not display in the Tool Dialog (Japanese). (49728)
- Fixed VoluTurn Process>Rotate Tab> "Reset to Tool Definition" & "Suggest Sub Position" buttons do not display in the Tool Dialog (Japanese). (49729)
- Fixed Lathe Rough Process>Rotate Tab>"Variable B" not display in the Tool Dialog (Japanese). (49731)
- Spindle Selection is now working properly. Got rid of flawed check for setting spindle. (49745)
- Fixed Lathe Groove Cycle Process>Rotate Tab>, "Reset to Tool Definition" & "Suggest Sub Position" buttons t display overlapping in the Tool Dialog (Japanese). (49732)
- Thread mill ops from hole features are now set with correct entry and exit clearance planes. (48862)
- Macro string variables cannot exceed 1023 characters. This also applies to text displayed by the Macro Message command. (49621)
- In thread mill ops, the CRC line is no longer generated if CRC is turned off. (49674)
- Feature manager will no longer highlight a group feature ID, if the individual feature ID selected for machining, is part of that group. (49675)
- Fixed an issue with pocketing toolpath processing incomplete toolpath. (49679)
- Resolved an issue that was causing tool holders to display improperly in machine simulation. (49703)
- Shift+Arrow key shortcut no longer stops working after clearing tile list selection. (49756)
- Lathe Tool>Round Insert - Round toolsno longer displays in a Hex shape in the Tool Rendering Image when switching to mm units. (49678)
- Post Processor Dialog - Cursor no longer disappears hovering over certain center area of the dialog (Windows 10 only). (49704)

About GibbsCAM V12. GibbsCAM is a powerful, easy to use CAM software for CNC machine programming that provides seamless integration any CAD package. GibbsCAMs wide range of programming capabilities provide solutions for 2- 5-axis milling, turning, multi-task machining, and is a software skillset.
About 3D Systems. 3D Systems provides comprehensive 3D products and services, including 3D printers, print materials, on-demand parts services and digital design tools. Its ecosystem supports advanced applications from the product design shop to the factory floor to the operating room. 3D Systems' precision healthcare capabilities include simulation, Virtual Surgical Planning, and printing of medical and dental devices as well as patient-specific surgical instruments. As the originator of 3D printing and a shaper of future 3D solutions, 3D Systems has spent its 30 year history enabling professionals and companies to optimize their designs, transform their workflows, bring innovative products to market and drive new business models.

Product: GibbsCAM
Version: 2018 V12 (version
Supported Architectures: x64
Website Home Page :
Necesitas estar registrado para poder ver los enlaces Registrate o Login

Language: multilanguage
System Requirements: PC
Supported Operating Systems: Windows 7even or newer / Server 2008 (R2) or 2012
Size: 29.0 Gb


Código: Necesitas estar registrado para poder ver los enlaces Registrate o Login